 Model Number |
KT-6030iG |
According to domestic and international regulations, the specified products should meet the suitable shock wave immobility efficiency .
Common Specification
| Output type |
Descriptions |
- Combination wave form
- Output voltage: 0~6 KV
- Output current: Max 3kA
(When output line is short)
- Other wave form (option)
- Other wave form (option)
|
- Combination waveform
- voltage waveform ( 6KV )
T1(rising time length) : 1.2 ± 0.36 µs
T2(duty time) : 50 ± 10µs
- 10/200µs
- 10/700µs
|
Products necessary for Impulse test
All switches (NFB, magnet, the circuit breaker), lightning arrester, surge arrester and etc.
Impulse waveform
To record the following impulse waveform, some facilities, such as 1/1000 Attenuation Divider, Digital Storage Scope and Printer are necessary, and basically equipped.
 |
Fig 5.2 : this graph shows the impulse waveform applied to the test product.
T1(Rising time) = 1.2µs ± 30 %
T2(Duty time) = 50µs ± 20%
|
Test procedure of impulse
Fig 5.3 : photo shows NFB under impulse test, and this product must not be destroyed or occurred with any abnormal phenomena after test.
| Please, connect output line "E" to ground of P.U.T or housing case. |
| Then, connect output line(G: hot or red) of Generator to "R". |
| Then, connect output line(G: hot or red) of Generator to "R". |
| If you think the high impulse test is dangerous, you may test with insertion of R-C circuit on "C" point. |
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page